Hazard And Risk Management In BRT (Bus Rapid Transit) Operator Workshop
Keywords:
ROADC, Occupational Health and Safety, Hazards, Risks, WorkshopAbstract
Lack of implementation of occupational safety and health and control of work accidents in workshops are the main causes of work accidents. Every public transportation company is important to have safety management standards by implementing a safety management system. Companies that employ more than 100 people and have a high level of potential hazards are required to have an OHS plan. Identification of hazards and risks is an initial step to minimize the increase in the number of accident cases. This study aims to prevent accidents and determine the source of danger from each activity that can cause work accidents in workshops using the ROADC (Risk Opportunity Assessment and Determining Control) method. This study will produce a risk level figure based on the severity and frequency of occurrence which will later be used as a basis for describing the potential for work accidents and the factors causing an accident and providing control recommendations. The results of the analysis based on 10 activities in the workshop contained 28 potential hazards. 12 potential hazards with a medium to high risk category, 7 potential hazards with a medium risk category, 7 potential hazards with a high risk category, and 2 potential hazards with a low to medium risk category. The activity of using a grinding machine is the activity that causes the most dangers and risks. Risk control in this study is in accordance with the control hierarchy, namely elimination, substitution, technical control, administrative control, and personal protective equipment.References
[1] N. Sulistyaningtyas, I. Teknologi, K. Tri, and T. Nasional, “Analisis Faktor-Faktor Penyebab Kecelakaan Akibat Kerja Pada Pekerja Konstruksi: Literature Review ANALISIS FAKTOR-FAKTOR PENYEBAB KECELAKAAN AKIBAT KERJA PADA PEKERJA KONSTRUKSI: LITERATURE REVIEW ANALYSIS OF FACTORS CAUSING WORK-RELATED ACCIDENTS IN CONSTRUCTION WORKERS: LITERATURE REVIEW,” 2021.
[2] “BPJS,” BPJS Ketenagakerjaan. Accessed: Feb. 02, 2025. [Online]. Available: https://www.bpjsketenagakerjaan.go.id/berita/28681/Kecelakaan-Kerja-Makin-Marak-dalam-Lima-Tahun-Terakhir
[3] J. H. S. Prayoga Giananta, “ANALISA POTENSI BAHAYA DAN PERBAIKAN SISTEM KESELAMATAN DAN KESEHATAN KERJA MENGGUNAKAN METODE HIRARC DI PT. BOMA BISMA INDRA,” 2020.
[4] T. W. Saputra, R. Dwi, A. Dan, and W. Jauhari, PENERAPAN METODE HAZARD IDENTIFICATION AND RISK ASESSMENT HIRA PADA BENGKEL LAS SINAR ARUM SEMANGGI. 2019.
[5] B. Lesmana, R. Cahyadi, Y. R. Fauzi, and R. Dinata, “Peningkatan Keahlian Pengelasan Gas Metal Arc Welding dan Keselamatan Kerja Pada Pengelasan Bagi Siswa SMK Syuhada Banjarmasin,” Jurnal Altifani Penelitian dan Pengabdian kepada Masyarakat, vol. 3, no. 1, pp. 72–77, Jan. 2023, doi: https://doi.org/10.25008/altifani.v3i1.341.
[6] 1 Tri Wisudawati, “PENGENDALIAN BAHAYA K3 MENGGUNAKAN METODE HIRARC DI BENGKEL LAS BINTANG JAYA STEEL SIDOSARI, KRAJAN, SUKOHARJO,” JAPTI: Jurnal Aplikasi Ilmu Teknik Industri, vol. 3, no. 1, pp. 45–51, 2022, [Online]. Available: www.journal.univetbantara.ac.id/index.php/japti
[7] J. Keselamatan, K. Kerja dan Lindungan Lingkungan, L. Zainul, A. Griyanta, I. Siboro, and P. Studi Keselamatan dan Kesehatan Kerja, “ANALISIS BAHAYA DAN RISIKO TERHADAP PEKERJAAN MAINTENANCE MOBIL DI PT BELFANO NAHLA UTAMA,” 2024. [Online]. Available: https://jurnal.d4k3.uniba-bpn.ac.id/index.php/identifikasi471
[8] A. Raynaldi, A. Ikhwan, and M. D. Irawan, “Implementasi AHP Dan Promethee Dalam Pemilihan Bengkel Resmi Terbaik Di Deli Serdang,” Juli, pp. 687–693, 2023, [Online]. Available: https://ojs.trigunadharma.ac.id/index.php/jsk/index
[9] Peraturan Menteri No.85 Tahun 2018, “Peraturan Menteri No.85 Tahun 2018.”
[10] Peraturan Pemerintah No.50, “PERATURAN PEMERINTAH REPUBLIK INDONESIA,” 2012.
[11] M. Rusli, “Merancang Penelitian Kualitatif Dasar/Deskriptif dan Studi Kasus,” 2020, [Online]. Available: http://repository.uin-
[12] F. Fadhilah, E. Amrina, and R. E. Gusvita, “Hazard Identification, Risk Assessment and Determining Control (HIRADC) in Mining Operations at PT Semen Padang,” MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, vol. 5, no. 3, pp. 473–484, Jul. 2023, doi: https://doi.org/10.46574/motivection.v5i3.249.
[13] NSF International-ISO 45001 Occupational Health and Safety Management Systems Migration Guide, “ISO 4500012018,” 2018.
[14] T. Saputro and D. Lombardo, “METODE HAZARD IDENTIFICATION, RISK ASSESSMENT AND DETERMINING CONTROL (HIRADC) DALAM MENGENDALIKAN RISIKO DI PT. ZAE ELANG PERKASA RISK CONTROL METHOD USING HAZARD IDENTIFICATION, RISK ASSESSMENT AND DETERMINING CONTROL (HIRADC) IN PT. ZAE ELANG PERKASA,” Jurnal Baut Dan Manufaktur, vol. 03, no. 1, 2021.
[15] Radityazty Dahayu Nurhayati and Yayok Suryo Purnomo, “Analisis Risiko K3 dengan Metode HIRADC pada Industri Pengolahan Makanan Laut di Jawa Timur,” INSOLOGI: Jurnal Sains dan Teknologi, vol. 2, no. 3, pp. 450–461, Jun. 2023, doi: https://doi.org/10.55123/insologi.v2i3.1883.
[16] Perum DAMRI, “Matriks Risiko,” 2024.
[17] Perum DAMRI, “Matriks Risiko Perum DAMRI,” 2023.
[18] J. Keselamatan, K. Kerja dan Lindungan Lingkungan, L. Zainul, A. Griyanta, I. Siboro, and P. Studi Keselamatan dan Kesehatan Kerja, “ANALISIS BAHAYA DAN RISIKO TERHADAP PEKERJAAN MAINTENANCE MOBIL DI PT BELFANO NAHLA UTAMA,” 2024. [Online]. Available: https://jurnal.d4k3.uniba-bpn.ac.id/index.php/identifikasi471
Downloads
Published
Issue
Section
License
Copyright (c) 2025 ANGEL LIKA DIANSYAH, JOKO SISWANTO, ARIEF NOVIANTO (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
